How to read a crane load chart
A step-by-step guide to reading a crane load chart: boom length and radius, gross and net capacity, deductions, the bold line and the notes, with a worked example.
Industrial coatings for Caribbean marine environments: epoxy, polyurethane and zinc
How marine coating systems protect steel in the Caribbean: ISO 12944 categories, what zinc, epoxy and polyurethane each do, surface preparation and inspection.
Preventive vs predictive maintenance in industrial plants: which one to use
The difference between preventive and predictive maintenance, what each saves according to DOE guidance, when predictive fails to pay and how to choose per asset.
Rotating equipment failures: what breaks pumps and compressors, and why
The common causes of pump and rotating equipment failure, how to tell them apart from vibration signatures and what a Caribbean plant can do about them.
Refinery turnaround planning: a six-step checklist
A six-step checklist for refinery turnaround planning: scope, scope freeze, work packages, long-lead items, day-one readiness and review, with published lead times.
Repair or replace a storage tank? A decision guide
Repair or replace a storage tank? The inspection data you need, the factors that favor each route and an example of the cost gap.
Welding positions explained: from 1G to 6G
A guide to welding positions 1G to 6G: flat, horizontal, vertical, overhead and pipe (5G, 6G), groove vs fillet, and welder qualification.
Types of Welding Explained: MIG vs TIG vs Stick vs Flux-Cored
The four types of welding compared: how MIG, TIG, stick and flux-cored arc welding work, their weld quality and speed, and how to choose the right process.
Safe Heavy Lift Operations in Sint Maarten: Crane Planning and NCCCO Standards
Complete guide to heavy lift planning and crane safety in Sint Maarten. NCCCO certification, lift plan requirements, permits and wind limits for Caribbean industrial projects.
How to Inspect a Storage Tank for Corrosion: Caribbean Field Checklist
Storage tank corrosion progresses 3-6x faster in Caribbean coastal environments. This step-by-step field checklist covers the 5 inspection zones, UT gauging procedure, and API 653 rating reference for Sint Maarten industrial operators.
EN
ES